Citation |
Stegman, A., De Andres, A., Jeffrey, H., Johanning, L. and Bradley, S. Exploring Marine Energy Potential in the UK Using a Whole Systems Modelling Approach, Energies, 10(9): 1251, 2017. https://doi.org/10.3390/en10091251. Cite this using DataCite |
Author(s) |
Stegman, A., De Andres, A., Jeffrey, H., Johanning, L. and Bradley, S. |
Abstract |
The key market drivers for marine energy are to reduce carbon emissions, and improve the security and sustainability of supply. There are other technologies that also meet these requirements, and therefore the marine energy market is dependent on the technology being cost effective, and competitive. The potential UK wave and tidal stream energy market is assessed using ETI’s energy systems modelling environment (ESME) which uses a multi-vector approach including energy generation, demand, heat, transport, and infrastructure. This is used to identify scenarios where wave and tidal energy form part of the least-cost energy system for the UK by 2050, and will assess what Levelised Cost of Energy (LCOE) reductions are required to improve the commercialization rate. The results indicate that an installed capacity of 4.9 GW of wave and 2.5 GW of tidal stream could be deployed by 2050 ifthe LCOE is within 4.5 and 7 p/kWh for each respective technology. If there is a step reduction to the LCOE of wave energy, however, a similar capacity of 5 GW could be deployed by 2050 at a LCOE of 11 p/kWh. |