go to top scroll for more

Macro DE - GB Benefits Case for Macro Distributed Energy


Citation Turton, A. and Woods,P. Macro DE - GB Benefits Case for Macro Distributed Energy, ETI, 2012. https://doi.org/10.5286/UKERC.EDC.000301.
Cite this using DataCite
Author(s) Turton, A. and Woods,P.
Project partner(s) Caterpillar (AECOM)
Publisher ETI
DOI https://doi.org/10.5286/UKERC.EDC.000301
Download DE_DE2002_8.pdf document type
Abstract The objective of the Distributed Energy (DE) Programme is to increase the uptake of DE through the development of integrated systems in order to reduce through-life costs, improve ease of installation and increase efficiency in the combined generation of heat and electricity. Within this programme framework the objective of the Macro DE FRP will develop and validate a software methodology to enable the design of optimised DE solutions where clusters of demand sites are linked with appropriate DE supply equipment. The project will quantify the opportunity for Macro level DE (up to 50MW) in the UK and the potential to accelerate the development of appropriate technology by 2020 for the purposes of significant implementation by 2030.

This is the final report on the benefits case for DE in Great Britain.

The assessment of the potential for DE across GB follows a staged process. It makes use of the 20 Characteristic Zones (CZs) which have been identified in work package 2 of this macro DE study as representative of areas potentially suitable for macro DE. A macro DE scheme is optimised for each CZ made up of a District Heating Network (DHN) and energy centre. The optimisation produces the lowest ‘levelised heat cost’ solution for the CZ. These results are then aggregated to a GB level by multiplying up to all zones within each class represented by a CZ. By comparing the macro DE heat costs with counterfactual costs from air source heat pumps (ASHPs) and gas boilers, an assessment can be made on where macro DE offers a more economic solution. Different GB uptakes can then be assessed based on zones where macro DE is economic, a net economic case (with some economic zones cross subsidising some un-economic zones), and a maximum CO2 reduction case (where the macro DE costs are not considered).

The report concludes
  1. There is a very large potential for macro DE using gas fired CHP in the 2010s and 2020s.
  2. Despite the technical and economic potential, many barriers exist which future policy aimed at supporting macro DE can help overcome.
  3. Macro DE may be a significant contributor to GB electricity supply with wide spread deployment.
  4. DHN costs dominate the capital expenditure and access to low cost finance can help reduce this impact.
  5. The CO2 savings from gas CHP will reduce in the 2030s, but alternative forms of generation can make use of the flexibility offered by DHNs.
Associated Project(s) ETI-DE2002: Macro Distributed Energy
Associated Dataset(s) No associated datasets
Associated Publication(s)

Macro DE - An Assessment of the GB Benefits Associated with Potential DE Technology Development

Macro DE - Application of Energy Centre Design Tool to Characteristic Zones

Macro DE - Description of design methodology and tool effectiveness

Macro DE - Design Practice Characterisation Report

Macro DE - Development of a methodology to calculate energy demand

Macro DE - District Heating Network (DHN) Design and Algorithm Verification

Macro DE - Energy Demand Analysis in Great Britain

Macro DE - Executive Summary - DE2002 / WP2.0: Development of a methodology to calculate energy demand

Macro DE - Executive Summary - DE2002 / WP2.3: Energy Demand Analysis in GB

Macro DE - Executive Summary - DE2002 / WP3.3: Technology Development Opportunities

Macro DE - Executive Summary - DE2002 / WP5.1: GB Benefits Case for Macro DE

Macro DE - Macro DE Technology Assessment Criteria

Macro DE - Macro DE WP5.4 : Summary Report

Macro DE - Project Baseline Objectives

Macro DE - Technology Development Opportunities