go to top scroll for more

Projects

Projects: Projects for Investigator
Reference Number NIA_WWU_043
Title Alternative PE joint preparation
Status Completed
Energy Categories Fossil Fuels: Oil Gas and Coal(Oil and Gas, Refining, transport and storage of oil and gas) 100%;
Research Types Applied Research and Development 100%
Science and Technology Fields ENGINEERING AND TECHNOLOGY (Mechanical, Aeronautical and Manufacturing Engineering) 100%
UKERC Cross Cutting Characterisation Not Cross-cutting 100%
Principal Investigator Project Contact
No email address given
Northern Gas Networks
Award Type Network Innovation Allowance
Funding Source Ofgem
Start Date 01 January 2017
End Date 01 April 2017
Duration 3 months
Total Grant Value £27,600
Industrial Sectors Technical Consultancy
Region Yorkshire & Humberside
Programme Network Innovation Allowance
 
Investigators Principal Investigator Project Contact , Northern Gas Networks (99.999%)
  Other Investigator Project Contact , Wales and West Utilities (0.001%)
Web Site http://www.smarternetworks.org/project/NIA_WWU_043
Objectives A report will be produced by the project partner Steer Energy Solutions Ltd detailing the conclusions of the project, along with basic prototypes. Success of the project will be a full assessment of the issues around PE pipe preparation for jointing, assessment of existing solutions for pipe preparation and the potential identification of new/improved methodologies and/or techniques for PE pipe preparation for jointing. This will be documented in a report to be produced by Steer Energy Solutions Ltd at the completion of the project.
Abstract The Gas Distribution Networks (GDNs) utilise electro-fusion of Polyethylene (PE) pipe and associated fittings, as the main component of the distribution network. The current methodology for the surface preparation of PE pipes for electro-fusion involves the scraping of any surface contamination or impurities with a hand scraper not originally intended for this purpose. The electro-fusion process is used to join the majority of pipe for the replacement of existing iron distribution mains as part of the on-going 30/30 replacement program and to expand and alter the existing PE distribution network. It is therefore imperative that the electro-fusion joints used to connect the PE pipe are constructed to the required standards to ensure a safe operating distribution network. Due to the conditions on site in which electro-fusion jointing is undertaken and the procedure required for preparation of the PE pipe ends there is the potential for unsuccessful or inconstant quality of jointing. There is evidence following investigations undertaken when electro-fusion joints have failed that the root causes are: Hand scrapers, which are not desirable for consistency e. g. over or under scrapingDirt retained in the pipe - significantly reducing the strength of the jointOvality of the pipe to be electro-fused With input from both the manufacturers and the field operatives to understand the issues involved, the project will seek to create, and prototype a number of solutions. These solutions will then be taken for a validation workshop where they are reviewed and their advantages and challenges examined. A report will be produced by the project partner Steer Energy Solutions Ltd detailing the conclusions of the project.Note : Project Documents may be available via the ENA Smarter Networks Portal using the Website link above
Data

No related datasets

Projects

No related projects

Publications

No related publications

Added to Database 26/04/18