go to top scroll for more

Projects

Projects: Projects for Investigator
Reference Number EP/R022062/1
Title Fault tolerant control for increased safety and security of nuclear power plants
Status Completed
Energy Categories Nuclear Fission and Fusion(Nuclear Fission, Nuclear supporting technologies) 100%;
Research Types Basic and strategic applied research 100%
Science and Technology Fields ENGINEERING AND TECHNOLOGY (Electrical and Electronic Engineering) 100%
UKERC Cross Cutting Characterisation Not Cross-cutting 100%
Principal Investigator Professor VM Becerra
No email address given
Sch of Energy and Electronic Engineerin
University of Portsmouth
Award Type Standard
Funding Source EPSRC
Start Date 01 December 2018
End Date 28 February 2022
Duration 39 months
Total Grant Value £292,834
Industrial Sectors Energy
Region South East
Programme Energy : Energy
 
Investigators Principal Investigator Professor VM Becerra , Sch of Energy and Electronic Engineerin, University of Portsmouth (99.999%)
  Other Investigator Dr N Bausch , Sch of Energy and Electronic Engineerin, University of Portsmouth (0.001%)
  Industrial Collaborator Project Contact , STS Defence Limited (0.000%)
Project Contact , Indira Gandhi Centre for Atomic Research, India (0.000%)
Web Site
Objectives
Abstract In safety-critical systems, such as nuclear power plants, the demand for reliability, safety and fault tolerance is high. Faults compromise plant safety, cause inefficiencies in the operation of industrial processes and reduce component life. In such safety-critical systems, it is useful to design control systems which are capable of tolerating potential faults to improve the reliability and availability while providing a desirable performance. A control system which can automatically tolerate component malfunctions, while maintaining desirable performance and stability properties is said to be a fault-tolerant control systemFault tolerant control approaches allow control systems to operate under fault conditions with minimal degradation of performance and stability, preventing localised, random, or intentional faults from developing into catastrophic system failures leading to accidents that may have severe consequences to human life, equipment, infrastructure, or the environment. Fault tolerance helps to reduce the damaging effects that faults can have while remedial action is taken to repair or eliminate the fault.The proposed work will develop a hierarchical fault-tolerant control scheme for PWR nuclear power plants which will be defined over three levels: execution, coordination and management levels. The execution level, which includes the reactor, steam generator and turbine, implements the control actions generated by the higher levels through actuators, senses relevant plant variables, and passes this information to the higher levels. The middle level acts as a coordinator between the plant manager level and the execution level. To maximise its capabilities, the coordination level will include a bank of four different controllers that will be designed to tolerate faults of different severity, and there will be a mechanism to select the most appropriate controller given the circumstances of the plant as required by the management level. The coordination level also contains a diagnostic and prognostic system, which will the plant data and knowledge about the useful life of components to detect and characterise sensor related and other plant faults. The top level manages plant performance monitoring, plant condition evaluation, and passes commands to the coordination level. In addition, the management level transmits operational data to and receives instructions from a central command, control, and communication system which interfaces with human operators.The project will also involve the development of a nuclear plant simulator which will be used to test in real-time the hierarchical fault tolerant control scheme to be developed and implemented, to generate data about the behaviour of the plant under normal and fault conditions, and to generate simplified models of the plant, or parts of the plant, to be used for the purposes of controller design. The real-time tests will permit to assess the developments in a computational environmentthat is close to what would be encountered on a real plant, hence ensuring that the control methods to be developed are as realistic as possible.The work will be carried out in collaboration with Bhabha Atomic Research Centre, an Indian research institution that specialises in nuclear energy, and will benefit from the involvement of STS Nuclear, a UK organisation that specialises in nuclear safety management and training.
Data

No related datasets

Projects

No related projects

Publications

No related publications

Added to Database 17/12/18