Department: None
Organisation: Rolls-Royce PLC
ACAPELLA
ATTESTS (Automotive Technology Transfer of Energy Storage Thermal Strategies)
Fast Make for Demonstrators and Low Volume
HDV Phase 1 Marine System Integration
Marine Vessel Systems Integration - Phase 1
New Architecture Detail Design
Pressurisation of IP-SOFC Technology for Second Generation Hybrid Application
Supercritical CO2 Waste Heat Recovery for Marine Gas Turbines
ANTELOPE
CCS Systems Modelling Tool-Kit
Heavy Duty Vehicle - Efficiency
Helm Wind
Marine applications of electric turbo-compounding for waste heat recovery
Modelling of Particulate and Vapour Deposition in Gas Turbines Fired on Coal Derived Gases
Resistive Superconducting Fault Current Limiter (RSFCL)
A Moving Cracking Story: Designing against Hydrogen Embrittlement in Titanium
A fundamental study of deformation mechanisms in advanced polycrystalline nickel-base superalloys
A whole-life approach to the development of high integrity welding technologies for Generation IV fast reactors
AIM (Advanced Instability Methods) for industry
AME NDT (Anisotropic Media Evaluation for Non-Destructive Testing)
ATF Solutions to Light Water-Cooled SMRs
Accounting for Spatial and Temporal Variations of Microstructure on Creep-Related Behaviour of Nickel-Base Superalloys
Active control of fluid flows in gas turbines
Addressing Challenges Through Effective Utilisation of High Performance Computing - a case for the UK Consortium on Turbulent Reacting Flows (UKCTRF)
Advanced Instability Methods (AIM) Network
Advanced Nuclear Materials
Advanced Research into Crystallographic Anisotropy & Nucleation Effects in single crystals (ARCANE)
Advanced ceramics from liquid feedstock for aerospace propulsion
Advanced modelling for two-phase reacting flows
Aerosol Deposition for Manufacturing and Developing Next Generation Dielectric Charge Storage Devices
Aerospace casting for the hybrid electric future
An integrated (ICME) approach to multiscale modelling of the fabrication and joining of powder processed parts
Analysis of Power Quality in Complex DC Power Networks
Bridging the gap between small scale mechanical testing and bulk material property measurements of advanced, structural nuclear materials
Brush seal Resistance to Inlet Swirl and Transient Loading Effects (BRISTLE)
Buoyancy-Induced Flow and Heat Transfer inside Compressor Rotors
CCP for nuclear thermal hydraulics - supporting next generation civil nuclear reactors (CCP NTH)
CFD Modelling of the acoustic response of sprays
Carbon Fibre Axle (CaFiAx)
Combined remote thermography and non-contact ultrasonic inspection techniques using pulsed laser excitation
Complex Contour Method
Composites: Made Faster - Rapid, physics-based simulation tools for composite manufacture
Condition monitoring and lifetime prognosis of electrical machines
Contact evolution based fretting fatigue prediction
Converter Architectures
Cornerstone: Mechanical Engineering Science to Enable Aero Propulsion Futures
Dealing with Evolving Constraints In Design Systems for Net Zero (DECIDE for Net Zero)
Decarbonised Clean Marine: Green Ammonia Thermal Propulsion (MariNH3)
Defect dynamics in energy materials
Designing alloys for resource efficiency (DARE)- a manufacturing approach
Developing Fundamental Theory and Enabling Technologies for Parallel Operation of Inverters to Facilitate Large-scale Utilisation of Renewable Energy
Developing Highly efficient HTS AC windings for fully superconducting machines
Development of a High Flux Accelerator-Driven Neutron Irradiation Facility for Nuclear Plant Materials and Applied Neutron Science
Development of a Micro-electromechanical Photoacoustic Spectrometer for Industrial Applications and the Study of SO2 at High Temperatures
Development of scalar dissipation rate based reaction rate models for the large eddy simulations of premixed flames
Development of superconducting composite permanent magnets for synchronous motors: an enabling technology for future electric aircraft
Development of ultra-compact combustors for low-carbon technology using trapped vortex concepts
Dislocation based modelling of deformation and fracture in real engineering alloys
Dislocation-Microstructure Interaction at a Crack Tip - In Search of a Driving Force for Short Crack Growth
EPSRC Star Academic Proposal
Electrochemical Energy Storage with Graphene-Enabled Materials
Electrodes by Design - Microstructural Engineering of High Performance Electrodes for Solid Oxide Fuel Cells
Electromagnetic tensor imaging for in-process welding inspection
Emergent Nanomaterials (Critical Mass Proposal)
Energy loss study for AC excited superconducting coils
Engineering Driven Sustainable Supply Networks - A UK/India Collaborative Study
Enhancing nuclear fuel efficiency through improved understanding of irradiation damage in zirconium cladding
FLITES : Fibre-Laser Imaging of gas Turbine Exhaust Species
Fatigue Testing beyond Extremes
Flexible and Efficient Power Plant: Flex-E-Plant
Friction: The Tribology Enigma
From Processing to Simulated In-Reactor Performance of Zr Cladding.
Fuel Cells- Powering a Greener Future
Fundamental engine fuel studies at intermediate & high pressures & temperatures
Future Electrical Machines Manufacturing Hub
Generation Integrated Energy Storage - A Paradigm Shift
Greener Aviation with Advanced Propulsion Systems (GAAPS)
Heterogeneous Mechanics in Hexagonal Alloys across Length and Time Scales
High Performance Ductile Composite Technology (HiPerDuCT)
High Temperature Zirconium Alloys for Nuclear Fusion and Generation IV Fission Reactors
How does primary liquid break-up determine the downstream spray characteristics of airblast atomisers?
Hydrogen in metals - from fundamentals to the design of new steels (HEmS)
In-situ Chemical Measurement and Imaging Diagnostics for Energy Process Engineering
Innovative Manufacturing Research Centre for Liquid Metal Engineering (IMRC-LiME)
Insulation degradation and lifetime of inverter-fed machines with fast switching (high dv/dt) converters
Integrated Ultrasonic Imaging for Inspection of Near-Surface Defects in Safety-Critical Components
Integrated, Market-fit and Affordable Grid-scale Energy Storage (IMAGES)
Investigation of fine-scale flows in composites processing
Investigation of the influence of extinction strain rates and heat release rate on the stability of swirl stabilised hydrogen premixed flames
LIGHT ALLOYS TOWARDS ENVIRONMETALLY SUSTAINABLE TRANSPORT: 2nd GENERATION SOLUTIONS FOR ADVANCED METALLIC SYSTEMS (LATEST2)
Laser Imaging of Turbine Engine Combustion Species (LITECS)
LightForm: Embedding Materials Engineering in Manufacturing with Light Alloys
Linking Microstructure to Neutron Irradiation Defects in Advanced Manufacture of Steels
MAPP: EPSRC Future Manufacturing Hub in Manufacture using Advanced Powder Processes
MIDAS - Mechanistic understanding of Irradiation Damage in fuel Assemblies
Manufacturing by Design
Material Lifeing Using Nonlinear Ultrasound
Materials for fusion & fission power
Mathematical Theory of Radiation Transport: Nuclear Technology Frontiers (MaThRad)
Mechanistic Understanding of the Damage and Fracture in Ceramic-Matrix Composites under Extreme Conditions
Micromechanical Modelling and Experimentation
Micron Resolution Full-Field Shape Metrology for High Value Engineering Applications
Miniature Ultrasonic Fatigue Analysis of Local Modified Regions near Welds and Surfaces in Ti alloys
Modelling surface effects in two-phase fluid processes across scales
Monitoring the integrity of engineering infrastructure non-destructively
Multi-projects on flow, turbulence and combustion using PIV systems
Multiphase Flow Optimisation Strategies with Industrial Applications (MFLOPS)
NDT for high-value manufacturing of composites
NEW METHODS FOR ULTRASONIC NDE OF DIFFICULT MATERIALS
Nanostructured Thermoelectric Oxides for Energy Generation: A Combined Experimental and Modelling Investigation
National Centre for Nuclear Robotics (NCNR)
New Nuclear Manufacturing (NNUMAN)
Nonlinear Inspection Using Phased Arrays
Nonlinear Ultrasonic Stimulated Infrared Thermography (NUSIT)
Novel GaN Power Devices and Packaging Technologies for 300 degC Ambient Operation
PRISM: Platform for Research In Simulation Methods
Physics-based predictive modeling for ultra-low-emission combustion technology
Potential Drop Monitoring of Creep Damage
Practice and theory in the design of martensitic steels
Pulsed eddy current stimulated thermographic NDE
Quantification of the Conditions Leading to the Formation of Defects in SX Superalloy Processing
Quantifying and Improving the Reliability of NDE
Quantitative Ultrasonic Array Nondestructive Testing applied to micro-scale defects in metallic components (QUANT)
Real-time modelling for condition monitoring and performance optimisation of gas turbine engines
Resilience and Robustness of Dynamic Manufacturing Supply Networks
Robotics and Artificial Intelligence for Nuclear (RAIN)
SIMulation of new manufacturing PROcesses for Composite Structures (SIMPROCS)
SUPERGEN - Future Network Technologies
SUPERGEN - The Energy Storage Consortium
SUPERGEN 1 Renewal Core - FlexNet: Renewal of the Supergen consortium on Future Network Technologies
SUPERGEN 2 - Conventional Power Plant Lifetime Extension Consortium
SUPERGEN 2 - Conventional Power Plant Lifetime Extension Consortium - CORE
SUPERGEN Highly Distributed Power Systems Consortium
Shipping in Changing Climates.
Silicide-Strengthened Steel - A New Method of Wear Protection within Nuclear Environments
Spectral Leading Edge Serrations for the Reduction of Aerofoil-Turbulence Interaction Noise
Stochastic ultrasonic scattering from the tips of rough cracks
Strategic Partnership in Structural Metallic Systems for Gas Turbines
Structural evolution across multiple time and length scales
Supergen Bioenergy Impact Hub 2023
Supergen Storage Network Plus 2019
THE FUTURE COMPOSITES MANUFACTURING HUB
TRANSIT: Towards a Robust Airport Decision Support System for Intelligent Taxiing
Tackling Combustion Instability in Low-Emission Energy Systems: Mathematical Modelling, Numerical Simulations and Control Algorithms
Tailoring of microstructural evolution in impregnated SOFC electrodes
Test Engines to Accelerate Net Zero Shipping and Power Generation (TITANZ)
Towards Zero Carbon Aviation (TOZCA)
Tracer-free, non-intrusive, time- and space-resolved temperature and scalar measurements
UK Fluids Network
Understanding the In-Reactor Performance of Advanced Ceramic Cladding Materials
Understanding the mechanism of acoustic emission generation due to surface asperity interaction in mixed lubrication conditions
Unsteady flow effects on film cooling in low-emissions gas turbine combustors
Contact Us
Disclaimer
Privacy Policy
©2004-2025
