Projects: Projects for Investigator |
||
Reference Number | EP/I000259/2 | |
Title | Reduction of Energy Demand in Buildings through Optimal Use of Wireless Behaviour Information (Wi-be) Systems | |
Status | Completed | |
Energy Categories | Energy Efficiency(Residential and commercial) 100%; | |
Research Types | Basic and strategic applied research 100% | |
Science and Technology Fields | SOCIAL SCIENCES (Sociology) 25%; ENGINEERING AND TECHNOLOGY (Electrical and Electronic Engineering) 25%; ENGINEERING AND TECHNOLOGY (Architecture and the Built Environment) 50%; |
|
UKERC Cross Cutting Characterisation | Not Cross-cutting 15%; Sociological economical and environmental impact of energy (Policy and regulation) 10%; Sociological economical and environmental impact of energy (Consumer attitudes and behaviour) 75%; |
|
Principal Investigator |
Dr L Shao No email address given Construction Management and Engineering University of Reading |
|
Award Type | Standard | |
Funding Source | EPSRC | |
Start Date | 01 September 2012 | |
End Date | 30 September 2013 | |
Duration | 13 months | |
Total Grant Value | £154,427 | |
Industrial Sectors | Construction; Energy; Information Technologies | |
Region | South East | |
Programme | Digital Economy, Energy Multidisciplinary Applications | |
Investigators | Principal Investigator | Dr L Shao , Construction Management and Engineering, University of Reading (100.000%) |
Industrial Collaborator | Project Contact , CIBSE (0.000%) Project Contact , Philips Research Laboratories, The Netherlands (0.000%) Project Contact , Microwatt (0.000%) |
|
Web Site | ||
Objectives | ||
Abstract | The recent availability of very low power (e.g., battery powered) wireless sensors, networks and personal communication devices has enabled the exploration of wireless systems for both monitoring personal energy use and for feeding back the information directly to individuals responsible. These are based on static wireless sensors utilising low cost, small, low power digital radio (ZigBee) and real-time user location sensors using RFID and Ultra-wideband (UWB) radio frequency technologies. Low cost, low power, user feedback technologies include Ekahau Wi-Fi based devices and mobile phones.The Wi-be system is truly user-centric and promises huge potential for instigating behaviour change and substantial energy demand reduction: it complements the smart metering technology and takes a significant step further in helping to identify specific wasteful energy use, actions to take and the persons to take them. Unlike the smart meter, which is expected to provide overall consumption data in specific feedback formats (11), the Wi-be approach forms a people/building energy technology interface that promises much greater energy behaviour changes that are widely replicable and adaptable to future energy technology scenarios. When implemented and used over a period of time, it could potentially bring about a durable behavioural change leading to efficient energy uses.However, development of this technology gives rise to inter-related challenges spanning ICT, building energy and user behaviour, which so far are largely being researched in isolation. What is required is a multi-disciplinary study to bring about a step change in the understanding of Wi-be technology to ensure its effectiveness and successful uptake. Based on a new collaboration, the study will provide tools, guidance and vastly improved understanding for effective implementations of the technology that would result in durable and significant reduction of energy demand. Specific objectives include:1. Construct a state-of-the-art very-low-power Wi-be system for monitoring and communicating personal energy behaviours in both domestic and non-domestic buildings. This will involve both in-building and on-body sensors and will be installed in an office building and a house, to be used as test beds for the integrated research:2. Conduct cross-disciplinary assessment of Wi-be by integrating the following: a. Sensor Network Research - determining what is practical, in terms of building and body sensors, in order to capture energy-inefficient behaviour; b. Wireless Research - modelling of wireless sensor signal propagation to ascertain the optimum configurations (e.g., location, power levels) and potential limitations to physical deployment of wireless sensors, network and other related communication devices operating at very low power (and consequently very long battery life); c. Behavioural Research - determine the optimum feedback interface, format and timing of sensor data presentation to individual energy users in order to achieve the best effects on stimulating immediate action and durable behavioural change; d. Building Energy Research - to assess interactions between building energy demand, supply and user behaviour, as well as benchmarks, and their implications for optimum arrangement for feedback to users;3. To engage users, manufacturers and other stakeholders to ensure quality and relevance of the results and their effective dissemination for commercial deployment. Dissemination of the integrated methodology, established in this feasibility study, will permit future deployment into large scale assessments and commercial exploitation | |
Data | No related datasets |
|
Projects | No related projects |
|
Publications | No related publications |
|
Added to Database | 24/09/13 |